Wax sticks glue gun and sealing wax sticks using tutorial

Using wax sticks glue gun and sealing wax sticks, you can make more than 800 sealing wax stickers every day.

In the past, many buyers of different company asked me how to quickly make a large number of sealing wax stickers. Because there are many commercial letters that need to be sealed, sometimes four or five hundred or thousands. It is too cumbersome and inefficient to using a sealing wax sticks with wick.

Now I want to share a better way with you. With the combination of wax sticks glue gun + sealing wax sticks, two people can complete the production of more than 800 sealing wax stickers in one day.

Preparation: At least 2-3 pieces of sealing wax sticks, keep well ventilated.

A tribute 11 mm round sealing wax sticks is slowly pushed into the wax sticks glue gun. Heat the glue gun into the power supply for about two minutes. Try to pull the trigger. If the wax flows out smoothly, you can operate the wax seal stamp.

When stamping, several pieces of wax seal stamps should be alternately cycled. The wax seal stamps that are used for a while must be cooled on the wet cotton cloth because the wax seal stamp is too hot and placed on the wet cotton cloth to allow it to cool. During the stamping process, you may tear off the paint seal and wax to cause the product to become obsolete. If this happens, you should remove the unqualified product from the paper in the first time (unqualified products, and then stamp sealing wax sticks without wick and wax seal spoon heating, so that it will not waste).

Maybe you will worry about the water on the wet cotton cloth, which will affect the effect. I am here to explain: generally a little wet cotton. If the wax seal stamp is placed on a damp cotton cloth and the water is squeezed out, the water marks will be carried into the wax liquid, resulting in a difference in the pattern of the wax sheets that are prepared. In addition, while using the wax sticks glue gun, be sure to note that the nozzle is very hot, remember not to touch it by hand.

According to this method, there are no problems with sealing more than 800 envelopes per day. If the pull piece of each color is very large, it is recommended to use a special color wax sticks glue gun, so that it will not cause two colors of the sealing wax sticker to cause waste during the color change process.