Various ways of using sealing wax

The sealing wax was invented by the Frenchman Russo around 1626. Through experiments, he mixed different ratios of tar, cinnabar and shellac (natural sealing wax from India) into a sealing wax. The color was red or brownish red. Then, using a suitable pattern of metal mold, it was printed on the sealing wax that had not been solidified. After cooling, You can leave a clear pattern.

No matter what the sealing wax used to do, in our eyes, everything is material, below is the usage of some of my sealing wax.

1. Pure color alone

Under the sealing wax sticker, a piece of maple leaf was pressed. At that time, I wanted to use red and blue to make a ride, but the sealing wax was slightly larger and the position was a little above, so the sealing wax would hold the maple leaf.

2. Mixed color use

The most common is to mix white. Occasionally, 2 to 3 similar colors will be used, and the blend of contrast colors has not been tried.

Tips:

For example, the above blue + white, evenly mixed is light blue; if you want to mix into the picture color, or marble, gently stir twice.

3. Use with paint pen

The ones I use the most are gold and silver.

4. Use with dried flowers

In fact, anything can be pressed, so the following usage.

5. Use with twine/hand mix

All of the above are used in the handbook, and the same method can be used on the package.

6. With string / hand mixed line / ribbon / dried flowers

It is very simple to make a sealing wax sticker. Pour the sealing wax on the release paper. After it is formed, take it down, punch it, and thread it.