How to print a gradient-colored wax seal sticker?

Step 1: Choose your favorite sealing wax beads/sealing wax sticks, cut them into small pieces and heat them on a spoon until the wax is completely melted. There are two points to pay attention to here. The first is the amount of wax, and the number of sealing wax beads is about three. To print a seal, the sealing wax sticks needs to be tried several times to find the right amount; the second is the distance between the fire and the spoon. Too close to it will cause the wax to burn out and smoke, and it will also blacken the wax. Too far away, the spoon will not be heated enough.

Step 2: Slowly pour the wax from the center of the circle onto the paper with a fire-paint spoon (the more round the pour, the better the effect), wait for a few seconds, press the seal slowly, and wait for the fire-paint to be basically shaped before Remove the stamp.

Step 3: The timing of pressing the stamp is very important, probably after the wax has solidified slightly, press it from the center. Do not use too much force, otherwise the center of the stamp will be thin and the sides will be thick.

Do not cover it with force immediately after pouring the wax oil, as this may turn the varnish into a puddle and affect the appearance.

Step 4: Finally, wait about ten seconds, and then press and hold the paper to uncover the seal.

Different shades depend on controlling the proportion of white and colored wax particles. If you want to be lighter, put more white wax particles. When it is almost melted, use a toothpick to stir the melted wax liquid. If you want a gradient with texture, don’t put the melted wax. The liquid was stirred too evenly.

TaBo specializes in design,manufacture and sell high quality sealing wax,wax seal stampe,seal wax sticker,wax seal gift sets,wine seal wax, wax seal accessories and so on Our sealing wax is made from natural wax and natrual resin,no toxic no pollution,the wax seal stamp is made by rose wooden handle and brass head. personalized wax seal stamp and custom wax seal adhesive sticker is ok for us.if the quantity is big enough,custom sealing wax and wax seal sets is ok too.